Restarting in 2022?

2022.01.16 16:26 jreilly89 Restarting in 2022?

So I played the heck out of this game when it first came out. Eventually I sold it and bought into Champions wholeheartedly. I've since gotten my fill and decided to go back to my original love.
What expansions should I pick up? With Dark City and X-men being out of print, I've been eyeing the following: -Paint the Town Red -Guardians of the Galaxy -Nor -Venom
submitted by jreilly89 to legendarymarvel [link] [comments]


2022.01.16 16:26 soulfulsolos Hang On to Your Love Jam

submitted by soulfulsolos to Sade [link] [comments]


2022.01.16 16:26 sooojeen Doubling recipe - how does this change pressure cooking time?

I’m doubling a recipe for an Instant Pot beef stew recipe and Instant Pot chicken fettuccine Alfredo and was wondering how this changes the cook time? Would the cook time be increased and if so, by how much?
submitted by sooojeen to instantpot [link] [comments]


2022.01.16 16:26 ElectricBongos this is a gurvitch moment

this is a gurvitch moment submitted by ElectricBongos to fullmutualism [link] [comments]


2022.01.16 16:26 68points ELI5: What is the difference between geomagnetic north and magnetic north?

submitted by 68points to explainlikeimfive [link] [comments]


2022.01.16 16:26 Sanitized_b01 Is Crash better than Mario?

In general aspects. Also, please don't fight in the comments.
View Poll
submitted by Sanitized_b01 to polls [link] [comments]


2022.01.16 16:26 Weekend_Nanchos How Do Vaccum Seal Containers Not Spark Fermentation for Food Storage?

I’m seeing these vaccuum seal containers for produce and I’m looking at them thinking “if I added salt to an anaerobic environment with sat it would ferment, without salt it would ferment and get bad bacteria”. Is the variable I’m not considering temp? I guess if you vacuum seal carrots and put in the fridge good and bad bacteria both never gets a chance to kickstart?
Finally, I though an anaerobic environment with carrots and potatoes was a too way to get botulism- without any salt or good bacteria happening what’s to stop botulism formation? Again, is the only difference is that it’s safe in the fridge be that stops the whole process?
Might be over thinking it but don’t want to just blindly take some tiktokers food storage tips without first being critical based on what I know about airless environments carrying risks if done poorly.
submitted by Weekend_Nanchos to fermentation [link] [comments]


2022.01.16 16:26 intalectoal “The fault, dear Brutus, is not in our stars / But in ourselves, that we are underlings.” - Kobe B Bryant

submitted by intalectoal to quotes [link] [comments]


2022.01.16 16:26 ibackk Fortnite xp Glitch New Map Code Chapter 3 | iBackk #Fortnite #Fortnitexp #Fortnitexpglitch #Fortniteglitch #FortniteChapter3 #FortniteCreative

Fortnite xp Glitch New Map Code Chapter 3 | iBackk #Fortnite #Fortnitexp #Fortnitexpglitch #Fortniteglitch #FortniteChapter3 #FortniteCreative submitted by ibackk to GetMoreViewsYT [link] [comments]


2022.01.16 16:26 RVCE21 Labrador Owners UK

Hello,
I am a Registered Veterinary Nurse (RVN) undertaking research into the awareness of Labrador owners of their health predispositions. I am looking for any UK Labrador owners to take part in my questionnaire. The link is below, it should take no longer than 5 minutes to complete and all responses are anonymous. There is a chance to win one of two £50 Amazon E-gift vouchers for participants too if they wish to be entered. I would be really grateful for any responses from UK based Labrador owners.
Thank you very much for your time and participation in advance, it is very much appreciated.
https://rvc.onlinesurveys.ac.uk/an-investigation-to-determine-labrador-retriever-owner-awa
submitted by RVCE21 to FoxRedLabrador [link] [comments]


2022.01.16 16:26 skylerrjoseph "otra vez" pero con gatitos 🐱

submitted by skylerrjoseph to rodezel [link] [comments]


2022.01.16 16:26 zero01101 RB4011 internal WLAN - enabling CAPsMAN instantly halves speed

copy/paste repost from mikrotik forums because it apparently needs to be mod-approved :/
greetings all,
my apologies for the intrusion, but i'm stymied. i've got an RB4011iGS+5HacQ2HnD running routerOS 6.48.6 handling 300mbps comcast cable internet, and decided to finally throw an AP or two at my setup. in preparation, i figured it'd probably be wise to set up CAPsMAN for the internal WLAN interfaces for familiarity and ensuring that existing devices will play nice, but once operational, wifi speed essentially gets cut in half (at least on 5ghz). wired networking is unaffected, naturally.
i promise i've read many, many, many, many threads and posts but am likely too simple to notice the flaw(s?) in my plans - i also admit i'm not even slightly knowledgeable regarding wireless networking beyond the absolute minimum basics required to make internet magically happen through the air.
wifi topology is pretty straightforward; arris cable modem feeds into RB4011 eth01, which internally powers the only wifi access point(s) in my home.
when CAP is disabled in the wireless interfaces, i can pretty effectively saturate my connection
immediately after enabling CAP and reconnecting to wifi, tested speed is significantly lower
i know the wiki states "creating many slave interfaces can decrease the overall performance of access point" but i'd surely think that 2 virtual SSIDs per radio wouldn't be that detrimental... particularly since this is the exact same configuration that i was enjoying 300mbps with mere minutes ago, the only difference being CAPsMAN's involvement
i created exports before and after enabling CAP on the wireless tables, the (anonymized) "CAP enabled" config is as follows:

# jan/16/2022 09:54:05 by RouterOS 6.48.6 # software id = P715-DLE2 # # model = RB4011iGS+5HacQ2HnD # serial number = Fxxxxxxxxxxx /caps-man channel add band=2ghz-b/g/n control-channel-width=20mhz extension-channel=XX name=\ 2.4g tx-power=18 add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=XXXX name=\ 5g tx-power=18 /interface bridge add admin-mac=2C:C8:1B:xx:xx:xx auto-mac=no comment=defconf name=bridge pvid=\ 100 vlan-filtering=yes /interface wireless # managed by CAPsMAN # channel: 2412/20-Ce/gn(15dBm), SSID: djabacus.net, CAPsMAN forwarding set [ find default-name=wlan2 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \ distance=indoors frequency=auto installation=indoor mode=ap-bridge name=\ 2g ssid=djabacus.net wireless-protocol=802.11 # managed by CAPsMAN # channel: 5180/20-Ceee/ac(15dBm)+5775/80(27dBm), SSID: 5g.djabacus.net, CAPsMAN forwarding set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=\ 20/40/80mhz-XXXX distance=indoors frequency=auto installation=indoor \ mode=ap-bridge name=5g ssid=5g.djabacus.net wireless-protocol=802.11 /interface ethernet set [ find default-name=sfp-sfpplus1 ] advertise=\ 10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full \ speed=1Gbps /interface vlan add interface=bridge name=guestVlan vlan-id=140 add interface=bridge name=iotVlan vlan-id=150 add interface=bridge name=mainVlan vlan-id=100 add interface=bridge name=serverVlan vlan-id=130 add interface=bridge name=wifiVlan vlan-id=120 /caps-man datapath add bridge=bridge client-to-client-forwarding=yes local-forwarding=yes name=\ wifipath /caps-man configuration add channel=2.4g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=140 \ datapath.vlan-mode=use-tag installation=any name=guest2g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=guest.djabacus.net add channel=2.4g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=150 \ datapath.vlan-mode=use-tag installation=any name=iot2g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=iot.djabacus.net add channel=2.4g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=120 \ datapath.vlan-mode=use-tag installation=any name=wifi2g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=djabacus.net add channel=5g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=120 \ datapath.vlan-mode=use-tag installation=any name=wifi5g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=5g.djabacus.net add channel=5g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=140 \ datapath.vlan-mode=use-tag installation=any name=guest5g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=guest.djabacus.net add channel=5g country="united states3" datapath=wifipath datapath.bridge=\ bridge datapath.local-forwarding=no datapath.vlan-id=150 \ datapath.vlan-mode=use-tag installation=any name=iot5g_cap_config \ security.authentication-types=wpa-psk,wpa2-psk ssid=iot.djabacus.net /interface ethernet switch port set 0 default-vlan-id=0 set 1 default-vlan-id=0 set 2 default-vlan-id=0 set 3 default-vlan-id=0 set 4 default-vlan-id=0 set 5 default-vlan-id=0 set 6 default-vlan-id=0 set 7 default-vlan-id=0 set 8 default-vlan-id=0 set 9 default-vlan-id=0 set 10 default-vlan-id=0 set 11 default-vlan-id=0 /interface list add comment=defconf name=WAN add comment=defconf name=LAN add name=MGMT add name=VLAN add name="TRUSTED LAN" add name="UNTRUSTED LAN" /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\ dynamic-keys supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" mode=dynamic-keys \ name=guestSecProfile supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" mode=dynamic-keys \ name=iotSecProfile supplicant-identity="" /interface wireless add disabled=no mac-address=2E:C8:1B::xx:xx:xx master-interface=2g name=\ "guest 2g" security-profile=guestSecProfile ssid=guest.djabacus.net add disabled=no mac-address=2E:C8:1B::xx:xx:xx master-interface=5g name=\ "guest 5g" security-profile=guestSecProfile ssid=guest.djabacus.net add disabled=no keepalive-frames=disabled mac-address=2E:C8:1B::xx:xx:xx \ master-interface=2g multicast-buffering=disabled name="iot 2g" \ security-profile=iotSecProfile ssid=iot.djabacus.net wds-cost-range=0 \ wds-default-cost=0 wps-mode=disabled add disabled=no keepalive-frames=disabled mac-address=2E:C8:1B::xx:xx:xx \ master-interface=5g multicast-buffering=disabled name="iot 5g" \ security-profile=iotSecProfile ssid=iot.djabacus.net wds-cost-range=0 \ wds-default-cost=0 wps-mode=disabled /ip firewall layer7-protocol add name="crappy youtube test" regexp="^.+(ytstatic.l.google.com|youtube-ui.l.\ google.com|youtubei.googleapis.com|youtube.googleapis.com|youtube.com|www.\ youtube.com|m.youtube.com|ytimg.com|s.ytimg.com|ytimg.l.google.com|youtube\ .l.google.com|i.google.com|googlevideo.com|youtu.be|youtube-nocookie.com).\ *\$" /ip pool add name=mainPool ranges=192.168.101.10-192.168.101.254 add name=wifiPool ranges=192.168.120.10-192.168.120.254 add name=serverPool ranges=192.168.130.50-192.168.130.254 add name=guestPool ranges=192.168.140.50-192.168.140.254 add name=iotPool ranges=192.168.150.50-192.168.150.254 /ip dhcp-server add address-pool=mainPool disabled=no interface=mainVlan name=mainDhcp add address-pool=serverPool disabled=no interface=serverVlan name=serverDhcp add address-pool=wifiPool disabled=no interface=wifiVlan name=wifiDhcp add address-pool=guestPool disabled=no interface=guestVlan name=guestDhcp add address-pool=iotPool disabled=no interface=iotVlan name=iotDhcp /system logging action set 3 remote=192.168.130.11 /caps-man manager set enabled=yes /caps-man manager interface set [ find default=yes ] forbid=yes add disabled=no interface=bridge add disabled=no interface=mainVlan add disabled=no interface=guestVlan add disabled=no interface=iotVlan add disabled=no interface=wifiVlan add disabled=no interface=serverVlan /caps-man provisioning add action=create-dynamic-enabled hw-supported-modes=a,an,ac \ master-configuration=wifi5g_cap_config name-format=prefix-identity \ name-prefix=wifi5g_cap_ slave-configurations=\ guest5g_cap_config,iot5g_cap_config add action=create-dynamic-enabled hw-supported-modes=b,g,gn \ master-configuration=wifi2g_cap_config name-format=prefix-identity \ name-prefix=wifi2g_cap_ slave-configurations=\ guest2g_cap_config,iot2g_cap_config /interface bridge filter # guest 5g not ready # in/out-bridge-port matcher not possible when interface (guest 5g) is not slave add action=drop chain=forward in-interface="guest 5g" # guest 5g not ready # in/out-bridge-port matcher not possible when interface (guest 5g) is not slave add action=drop chain=forward out-interface="guest 5g" # guest 2g not ready # in/out-bridge-port matcher not possible when interface (guest 2g) is not slave add action=drop chain=forward in-interface="guest 2g" # guest 2g not ready # in/out-bridge-port matcher not possible when interface (guest 2g) is not slave add action=drop chain=forward out-interface="guest 2g" /interface bridge port add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether2 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether3 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether4 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether5 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether6 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether7 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether8 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether9 pvid=100 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=ether10 pvid=100 add bridge=bridge comment=defconf frame-types=admit-only-vlan-tagged \ ingress-filtering=yes interface=sfp-sfpplus1 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=5g pvid=120 add bridge=bridge comment=defconf frame-types=\ admit-only-untagged-and-priority-tagged interface=2g pvid=120 add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \ interface="guest 5g" pvid=140 add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \ interface="guest 2g" pvid=140 add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \ interface="iot 5g" pvid=150 add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \ interface="iot 2g" pvid=150 /ip neighbor discovery-settings set discover-interface-list="TRUSTED LAN" /interface bridge vlan add bridge=bridge comment="hopefully just normal" tagged=bridge,sfp-sfpplus1 \ untagged=ether2,ether3,ether4,ether5,ether6,ether7,ether8,ether9,ether10 \ vlan-ids=100 add bridge=bridge comment="hopefully wifi vlan" tagged=bridge untagged=5g,2g \ vlan-ids=120 add bridge=bridge comment="hopefully serveVM vlan" tagged=\ bridge,sfp-sfpplus1 vlan-ids=130 add bridge=bridge comment="hopefully guest wifi vlan" tagged=bridge untagged=\ "guest 5g,guest 2g" vlan-ids=140 add bridge=bridge comment="hopefully iot vlan" tagged=bridge,sfp-sfpplus1 \ untagged="iot 2g,iot 5g" vlan-ids=150 /interface detect-internet set detect-interface-list=all /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN add interface=mainVlan list=LAN add interface=serverVlan list=LAN add interface=wifiVlan list=LAN add interface=mainVlan list=MGMT add interface=mainVlan list=VLAN add interface=serverVlan list=VLAN add interface=wifiVlan list=VLAN add interface=serverVlan list="TRUSTED LAN" add interface=mainVlan list="TRUSTED LAN" add interface=wifiVlan list="TRUSTED LAN" add interface=guestVlan list="UNTRUSTED LAN" add interface=bridge list="TRUSTED LAN" add interface=iotVlan list="UNTRUSTED LAN" /interface wireless cap # set bridge=bridge caps-man-addresses=127.0.0.1 discovery-interfaces=bridge \ enabled=yes interfaces=5g,2g /ip address add address=192.168.101.1/24 interface=mainVlan network=192.168.101.0 add address=192.168.120.1/24 interface=wifiVlan network=192.168.120.0 add address=192.168.130.1/24 interface=serverVlan network=192.168.130.0 add address=192.168.140.1/24 interface=guestVlan network=192.168.140.0 add address=192.168.150.1/24 interface=iotVlan network=192.168.150.0 /ip dhcp-client add comment=defconf disabled=no interface=ether1 use-peer-dns=no /ip dhcp-server lease add address=192.168.130.5 mac-address=EC:8E:B5:A0:AA:F0 server=serverDhcp add address=192.168.130.11 client-id=\ ff::xx:xx:xx mac-address=\ 3A:CD:DB::xx:xx:xx server=serverDhcp add address=192.168.130.12 client-id=1:8a::xx:xx:xx mac-address=\ 8A:F8:AD::xx:xx:xx server=serverDhcp add address=192.168.150.11 client-id=1:2c::xx:xx:xx mac-address=\ 2C:AA:8E::xx:xx:xx server=iotDhcp add address=192.168.150.12 client-id=1:2c::xx:xx:xx mac-address=\ 2C:AA:8E::xx:xx:xx server=iotDhcp add address=192.168.150.251 comment="garage door" mac-address=\ 24:18:C6::xx:xx:xx server=iotDhcp add address=192.168.150.250 comment="christmas lights switch" mac-address=\ B4:E6:2D::xx:xx:xx server=iotDhcp add address=192.168.150.248 comment="philips hue hub" mac-address=\ 00:17:88::xx:xx:xx server=iotDhcp add address=192.168.150.13 client-id=1:2c::xx:xx:xx mac-address=\ 2C:AA:8E::xx:xx:xx server=iotDhcp add address=192.168.130.4 client-id=1:b8::xx:xx:xx mac-address=\ B8:69:F4::xx:xx:xx server=serverDhcp add address=192.168.101.10 client-id=1:d4::xx:xx:xx mac-address=\ D4:76:A0::xx:xx:xx server=mainDhcp add address=192.168.130.18 client-id=\ ff::xx:xx:xx mac-address=\ 26:F7:6F::xx:xx:xx server=serverDhcp add address=192.168.130.19 mac-address=A2:FC:68::xx:xx:xx server=serverDhcp add address=192.168.150.246 mac-address=F4:F5:D8::xx:xx:xx server=iotDhcp add address=192.168.150.245 mac-address=E4:F0:42::xx:xx:xx server=iotDhcp add address=192.168.150.244 client-id=ff::xx:xx:xx \ comment=ecobee mac-address=44:61:32::xx:xx:xx server=iotDhcp add address=192.168.130.41 client-id=\ ff::xx:xx:xx mac-address=\ 16:5D:26::xx:xx:xx server=serverDhcp add address=192.168.130.20 mac-address=32:12:61::xx:xx:xx server=serverDhcp add address=192.168.130.9 client-id=1:6e::xx:xx:xx comment=\ "nginx reverse proxy" mac-address=6E:55:01::xx:xx:xx server=serverDhcp add address=192.168.130.61 client-id=\ ff::xx:xx:xx mac-address=\ B6:37:1F::xx:xx:xx server=serverDhcp add address=192.168.101.4 client-id=1:b8::xx:xx:xx mac-address=\ B8:69:F4::xx:xx:xx server=mainDhcp add address=192.168.101.22 client-id=1:dc::xx:xx:xx mac-address=\ DC:2C:6E::xx:xx:xx server=mainDhcp add address=192.168.101.23 client-id=1:dc::xx:xx:xx mac-address=\ DC:2C:6E::xx:xx:xx server=mainDhcp /ip dhcp-server network add address=192.168.101.0/24 gateway=192.168.101.1 add address=192.168.120.0/24 gateway=192.168.120.1 add address=192.168.130.0/24 gateway=192.168.130.1 add address=192.168.140.0/24 gateway=192.168.140.1 add address=192.168.150.0/24 gateway=192.168.150.1 /ip dns set servers=192.168.130.11,192.168.130.16,192.168.130.17 /ip firewall filter add action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=\ invalid log=yes log-prefix="DROP INVALID" add action=accept chain=input comment="mgmt vlan allowed for everything" \ in-interface-list=MGMT add action=accept chain=input comment="server vlan allowed for everything" \ in-interface=serverVlan add action=accept chain=input comment="wifi vlan allowed for everything" \ in-interface=wifiVlan add action=accept chain=input comment="allow VLAN DHCP" dst-port=67 \ in-interface-list=VLAN protocol=udp add action=accept chain=input comment="allow VLAN UDP DNS" dst-port=53 \ in-interface-list=VLAN protocol=udp add action=accept chain=input comment="allow VLAN TCP DNS" dst-port=53 \ in-interface-list=VLAN protocol=tcp add action=accept chain=input comment="allow VLAN TCP DNS over TLS" dst-port=\ 853 in-interface-list=VLAN protocol=tcp add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp add action=accept chain=input comment=\ "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1 add action=accept chain=input comment="capsman self cap" dst-port=5246,5247 \ protocol=udp src-address=127.0.0.1 add action=drop chain=input comment="defconf: drop all not coming from LAN" \ in-interface-list=!LAN log=yes log-prefix="DROP NOT LAN INPUT RULE" add action=drop chain=input comment="drop wan explicitly" in-interface-list=\ WAN log=yes log-prefix="DROP WAN" add action=accept chain=output comment="self-CAPsMAN i think" dst-address=\ 127.0.0.1 log=yes log-prefix="wtf capsman" protocol=udp src-address=\ 127.0.0.1 src-port=5246,5247 add action=accept chain=forward comment="defconf: accept in ipsec policy" \ ipsec-policy=in,ipsec add action=accept chain=forward comment="defconf: accept out ipsec policy" \ ipsec-policy=out,ipsec add action=accept chain=forward comment="VLAN internet access" \ connection-state=new in-interface-list=VLAN out-interface-list=WAN add action=accept chain=forward comment="trusted lan can do everything" \ in-interface-list="TRUSTED LAN" log-prefix=omgfirewall add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add action=accept chain=forward comment=\ "defconf: accept established,related, untracked" connection-state=\ established,related,untracked add action=accept chain=forward comment="wireguard\?" dst-address=\ 192.168.130.5 dst-port=51820 in-interface=ether1 log=yes log-prefix=\ wireguardFirewallPls protocol=udp add action=accept chain=forward comment=\ "allow port forwarding DSTNAT - enable if needed for server" \ connection-nat-state=dstnat connection-state=new in-interface-list=WAN add action=drop chain=forward comment="defconf: drop invalid" \ connection-state=invalid log=yes log-prefix="DROP INVALID FWD" add action=drop chain=forward comment=\ "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ connection-state=new in-interface-list=WAN log=yes log-prefix=\ "DROP NON DSTNAT WAN FWD" add action=accept chain=forward comment="guest lan gotta get DNS i suppose" \ dst-port=53 in-interface-list="UNTRUSTED LAN" protocol=udp add action=accept chain=forward comment=\ "guest lan gotta get DNS over TLS too i suppose" dst-port=853 \ in-interface-list="UNTRUSTED LAN" protocol=tcp add action=accept chain=forward comment="let untrusted talk back to trusted" \ connection-state=established,related in-interface-list="UNTRUSTED LAN" \ out-interface-list="TRUSTED LAN" add action=drop chain=forward comment="block guest vlan from other vlans" \ in-interface-list="UNTRUSTED LAN" log-prefix="bad guest" \ out-interface-list="TRUSTED LAN" add action=drop chain=forward comment="block guest vlan from modem" \ dst-address=192.168.100.1 in-interface-list="UNTRUSTED LAN" log-prefix=\ "bad guest" add action=accept chain=forward comment=\ "i guess i have to tell it that guests can talk to the internet at least" \ connection-state=new in-interface-list="UNTRUSTED LAN" \ out-interface-list=WAN add action=drop chain=forward comment="just drop everything not listed above" \ log=yes log-prefix="DROP EVERYTHING ELSE FWD" /ip firewall mangle add action=passthrough chain=forward comment="debiphone download" disabled=\ yes dst-address=192.168.120.236 add action=passthrough chain=forward comment="obelisk download" disabled=yes \ dst-address=192.168.120.241 /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" \ ipsec-policy=out,none out-interface-list=WAN add action=dst-nat chain=dstnat comment="laptop wireguard" dst-port=51820 \ in-interface-list=WAN log=yes log-prefix=wireguardPls protocol=udp \ to-addresses=192.168.130.5 to-ports=51820 add action=dst-nat chain=dstnat comment="omv-plex remote access" dst-port=\ 32400 in-interface-list=WAN log=yes log-prefix=PLEX_REMOTE protocol=tcp \ to-addresses=192.168.130.13 to-ports=32400 add action=dst-nat chain=dstnat comment="fg40f tls acme" dst-port=443 \ in-interface-list=WAN log=yes log-prefix=fg40f-tls-acme protocol=tcp \ to-addresses=192.168.101.10 to-ports=443 add action=dst-nat chain=dstnat comment="fg40f insec acme" dst-port=80 \ in-interface-list=WAN log=yes log-prefix=fg40f-insec-acme protocol=tcp \ to-addresses=192.168.101.10 to-ports=80 add action=dst-nat chain=dstnat comment="fg40f sslvpn" dst-port=4443 \ in-interface-list=WAN log=yes log-prefix=fg40f-sslvpn protocol=tcp \ to-addresses=192.168.101.10 to-ports=4443 add action=dst-nat chain=dstnat comment="fg40f remote https" dst-port=16443 \ in-interface-list=WAN log=yes log-prefix=fg40f-sec protocol=tcp \ to-addresses=192.168.101.10 to-ports=16443 add action=dst-nat chain=dstnat comment="fg40f remote http" dst-port=16280 \ in-interface-list=WAN log=yes log-prefix=fg40f-insec protocol=tcp \ to-addresses=192.168.101.10 to-ports=16280 /ip upnp set enabled=yes /ip upnp interfaces add interface=bridge type=internal add interface=ether1 type=external /routing igmp-proxy interface add alternative-subnets=192.168.120.0/24 interface=serverVlan upstream=yes add interface=mainVlan add interface=wifiVlan /system clock set time-zone-name=America/Chicago /system identity set name=rb4011 /system leds add interface=2g leds="2g_signal1-led,2g_signal2-led,2g_signal3-led,2g_signal4\ -led,2g_signal5-led" type=wireless-signal-strength add interface=2g leds=2g_tx-led type=interface-transmit add interface=2g leds=2g_rx-led type=interface-receive /system logging set 0 action=remote topics=info,!firewall set 1 action=remote set 2 action=remote set 3 action=remote add action=remote prefix=syslog-firewall topics=firewall,info add action=echo topics=critical add topics=error add topics=info,!firewall,!wireless,!dhcp add topics=warning add action=remote prefix=syslog-wireless topics=wireless,info add action=remote prefix=syslog-dhcp topics=dhcp,info add topics=critical add action=remote prefix=syslog-caps topics=caps /system ntp server set broadcast=yes enabled=yes multicast=yes /system package update set channel=long-term /system scheduler add interval=1d name=backup-config-to-ftp on-event=backup-ros-config policy=\ ftp,read,write,policy,test,password,sensitive start-date=dec/29/2021 \ start-time=23:45:00 /system script add dont-require-permissions=yes name=backup-ros-config owner=djabacus \ policy=ftp,read,write,policy,test,password,sensitive source="#\r\ \n# Backup ROS to FTP\r\ \n#\r\ \n# Define variables\r\ \n:local ftphost \"192.168.130.13\"\r\ \n:local ftpuser \"REDACTED\"\r\ \n:local ftppassword \"REDACTED\"\r\ \n:local ftppath \"/baseShare/rosbkup/\"\r\ \n:local backupfilename \"rOS_v\"\r\ \n:local localbackuppath \"cfgbkp\"\r\ \n#\r\ \n# Get date and time\r\ \n#\r\ \n{\r\ \n:local curDate [/system clock get date]\r\ \n:local curTime [/system clock get time]\r\ \n:local systemName [/system identity get name]\r\ \n:local systemFirmware [/system routerboard get current-firmware]\r\ \n:local curMonth [:pick \$curDate 0 3]\r\ \n :set curMonth ( [ :find key=\"\$curMonth\" in=\"jan,feb,mar,apr,may,jun\ ,jul,aug,sep,oct,nov,dec\" from=-1 ] / 4 + 1)\r\ \n if ( \$curMonth < 10 ) do={\r\ \n :set curMonth ( \"0\".\$curMonth )\r\ \n } else={\r\ \n :set curMonth \$curMonth\r\ \n }\r\ \n:local curDay [:pick \$curDate 4 6]\r\ \n:local curYear [:pick \$curDate 7 13]\r\ \n:local curHour [:pick \$curTime 0 2]\r\ \n:local curMin [:pick \$curTime 3 5]\r\ \n:local now (\"\$curYear\".\"\$curMonth\".\"\$curDay\" .\"-\".\"\$curHour\ \".\"\$curMin\")\r\ \n#\r\ \n# Make config backup locally\r\ \n#\r\ \n:log warn message=\"local backup started\";\r\ \nexport file=\"\$localbackuppath/\$now_\$systemName_\$backupfilename_\$sy\ stemFirmware\"\r\ \n/system backup save name=\"\$localbackuppath/\$now_\$systemName_\$backup\ filename_\$systemFirmware\"\r\ \n:log warn message=\"local backup finished\";\r\ \n#\r\ \n# Copy config backup to FTP\r\ \n#\r\ \n:log warn message=\"config backup to FTP started\";\r\ \n/tool fetch address=\"\$ftphost\" src-path=\"\$localbackuppath/\$now_\$s\ ystemName_\$backupfilename_\$systemFirmware.backup\" user=\"\$ftpuser\" mo\ de=ftp password=\"\$ftppassword\" dst-path=\"\$ftppath/\$systemName/\$now_\ \$systemName_\$backupfilename_\$systemFirmware.backup\" upload=yes\r\ \n/tool fetch address=\"\$ftphost\" src-path=\"\$localbackuppath/\$now_\$s\ ystemName_\$backupfilename_\$systemFirmware.rsc\" user=\"\$ftpuser\" mode=\ ftp password=\"\$ftppassword\" dst-path=\"\$ftppath/\$systemName/\$now_\$s\ ystemName_\$backupfilename_\$systemFirmware.rsc\" upload=yes\r\ \n:log warn message=\"config backup to FTP finished\";\r\ \n#\r\ \n# Remove locally created files\r\ \n#\r\ \n:log warn message=\"removing local backup\";\r\ \nfile remove \"\$localbackuppath/\$now_\$systemName_\$backupfilename_\$sy\ stemFirmware.backup\"\r\ \nfile remove \"\$localbackuppath/\$now_\$systemName_\$backupfilename_\$sy\ stemFirmware.rsc\"\r\ \n:log warn message=\"local backup removed\";\r\ \n#\r\ \n}" /tool graphing interface add allow-address=192.168.120.0/24 add allow-address=192.168.101.0/24 add allow-address=192.168.130.0/24 /tool graphing resource add allow-address=192.168.101.0/24 add allow-address=192.168.120.0/24 add allow-address=192.168.130.0/24 /tool mac-server set allowed-interface-list="TRUSTED LAN" /tool mac-server mac-winbox set allowed-interface-list="TRUSTED LAN" /tool romon set enabled=yes 
i also diffed the two configurations and these were the only changes between the two (CAP disabled on left, enabled on right) diff 1 diff 2 diff 3
i am fully expecting this to be a shameful, embarrassing oversight on my end and readily await being yelled at for making such an obvious, noobish mistake and will probably be a little disappointed if i get out of this unscathed ;)
thanks in advance for any assistance or even just giving this a glance! -tim
submitted by zero01101 to mikrotik [link] [comments]


2022.01.16 16:26 CBeisbol Playoff Games Are Rigged /s

Playoff Games Are Rigged /s submitted by CBeisbol to OOTP [link] [comments]


2022.01.16 16:26 Aprilxflower Selling winter18 and winter20.

Ia for both: 1.95/2mil
submitted by Aprilxflower to RoyaleHighTrading [link] [comments]


2022.01.16 16:26 TheCookingPilot London looking superb from above

London looking superb from above submitted by TheCookingPilot to london [link] [comments]


2022.01.16 16:26 Capnkirk14 Anyone who has hit both Sim2 & Sim2 max see any major difference?

Taylormade website has an online exclusive Sim 2 driver with a slightly different color scheme that I would love to have. Isn’t offered for Sim 2 max though. Before I pull the trigger should I be concerned about the “additional forgiveness” I’m missing out on?
submitted by Capnkirk14 to golf [link] [comments]


2022.01.16 16:26 kroeller a

submitted by kroeller to ShadowBan [link] [comments]


2022.01.16 16:26 bossboss21 Check out the yt

submitted by bossboss21 to YouTubePromo [link] [comments]


2022.01.16 16:26 lookingforagamergirl came across this r32 in kansas otw to the chiefs game!

came across this r32 in kansas otw to the chiefs game! submitted by lookingforagamergirl to GolfGTI [link] [comments]


2022.01.16 16:26 D4rkside666 Isso é tão minha cidade

Isso é tão minha cidade submitted by D4rkside666 to daplayluh [link] [comments]


2022.01.16 16:26 saberToothedCat Finally got my Prusa MINI kit built and after a week of failed prints and tinkering I finally got one to come out without any shifting. Now I want to try to eliminate these lines. They go all the way around. Any ideas?

Finally got my Prusa MINI kit built and after a week of failed prints and tinkering I finally got one to come out without any shifting. Now I want to try to eliminate these lines. They go all the way around. Any ideas? submitted by saberToothedCat to 3Dprinting [link] [comments]


2022.01.16 16:26 JenniferKittyGacha Why tho ;-;

I went to mourn the death of my dead dog. She got strangled by a chain. The death message I got was "All choked up".


There is a time and a place, Bitlife.
submitted by JenniferKittyGacha to BitLifeApp [link] [comments]


2022.01.16 16:26 burnerrssss My fiancé disregarded every idea I gave him and he proposed with a ring I don’t exactly love…

So my (21F) now fiancé (21M) completely disregarded what I wanted in a ring. We went looking at rings together and everything! I sent him exact rings, pinterest boards full of a simple idea and variations of it, the cuts I wanted, the colours, what I didn’t want, etc.
I’m marrying a man who is terrible at gifts and that is a flaw that I love about him! But a flaw nonetheless. So I knew I needed to be extremely straight forward with what I wanted, but to no avail.
I encouraged him to wait until he can afford something a bit more expensive (like $2000+) but he was convinced $1000 was enough. I said okay as long as it has a good warranty and looks nice.
He ended up getting me the exact opposite of what I wanted… It was $800 from the promise ring section of a popular jeweller. He bought it one week before proposing.
I go through phases of loving it but sometimes I look at it and just think about how he disregarded everything I sent him and for what? Like I always imagined having this exact type of ring, I didn’t my best to make that happen, and I guess I’m just let down about that? Idk.
I’m grateful I get to spend the rest of my life with this man, but spending the rest of my life with this ring that is just sooo not me has me anxious. What do I do? If anything…
submitted by burnerrssss to EngagementRings [link] [comments]


2022.01.16 16:26 _Yazeed Help with Drivers Issue

I used DUU then reinstalled my drivers and then reinstalled my monitor's drivers, and now g-sync compatible doesn't show anymore on my control panel. How can I fix this?
submitted by _Yazeed to nvidia [link] [comments]


2022.01.16 16:26 Sacri_Pan Helga is based (context in comments)

Helga is based (context in comments) submitted by Sacri_Pan to JimmyPulsatingMass [link] [comments]


http://trakdetal.ru